pip-install-ghxuqwgs/numpy_78e94bf2b6094bf9a1f3d92042f9bf46/doc/source/user/basics.io.genfromtxt.rst

.. sectionauthor:: Pierre Gerard-Marchant <[email protected]>

*********************************************
Importing data with :func:`~numpy.genfromtxt`
*********************************************

Numpy provides several functions to create arrays from tabular data.
We focus here on the :func:`~numpy.genfromtxt` function.

In a nutshell, :func:`~numpy.genfromtxt` runs two main loops.  The first
loop converts each line of the file in a sequence of strings.  The second
loop converts each string to the appropriate data type.  This mechanism is
slower than a single loop, but gives more flexibility.  In particular,
:func:`~numpy.genfromtxt` is able to take missing data into account, when
other faster and simpler functions like :func:`~numpy.loadtxt` cannot.

.. note::

   When giving examples, we will use the following conventions::

       >>> import numpy as np
       >>> from StringIO import StringIO



Defining the input
==================

The only mandatory argument of :func:`~numpy.genfromtxt` is the source of
the data.  It can be a string corresponding to the name of a local or
remote file, or a file-like object with a :meth:`read` method (such as an
actual file or a :class:`StringIO.StringIO` object).  If the argument is
the URL of a remote file, this latter is automatically downloaded in the
current directory.

The input file can be a text file or an archive.  Currently, the function
recognizes :class:`gzip` and :class:`bz2` (`bzip2`) archives.  The type of
the archive is determined by examining the extension of the file: if the
filename ends with ``'.gz'``, a :class:`gzip` archive is expected; if it
ends with ``'bz2'``, a :class:`bzip2` archive is assumed.



Splitting the lines into columns
================================

The :keyword:`delimiter` argument
---------------------------------

Once the file is defined and open for reading, :func:`~numpy.genfromtxt`
splits each non-empty line into a sequence of strings.  Empty or commented
lines are just skipped.  The :keyword:`delimiter` keyword is used to define
how the splitting should take place.

Quite often, a single character marks the separation between columns.  For
example, comma-separated files (CSV) use a comma (``,``) or a semicolon
(``;``) as delimiter::

   >>> data = "1, 2, 3\n4, 5, 6"
   >>> np.genfromtxt(StringIO(data), delimiter=",")
   array([[ 1.,  2.,  3.],
          [ 4.,  5.,  6.]])

Another common separator is ``"\t"``, the tabulation character.  However,
we are not limited to a single character, any string will do.  By default,
:func:`~numpy.genfromtxt` assumes ``delimiter=None``, meaning that the line
is split along white spaces (including tabs) and that consecutive white
spaces are considered as a single white space.

Alternatively, we may be dealing with a fixed-width file, where columns are
defined as a given number of characters.  In that case, we need to set
:keyword:`delimiter` to a single integer (if all the columns have the same
size) or to a sequence of integers (if columns can have different sizes)::

   >>> data = "  1  2  3\n  4  5 67\n890123  4"
   >>> np.genfromtxt(StringIO(data), delimiter=3)
   array([[   1.,    2.,    3.],
          [   4.,    5.,   67.],
          [ 890.,  123.,    4.]])
   >>> data = "123456789\n   4  7 9\n   4567 9"
   >>> np.genfromtxt(StringIO(data), delimiter=(4, 3, 2))
   array([[ 1234.,   567.,    89.],
          [    4.,     7.,     9.],
          [    4.,   567.,     9.]])


The :keyword:`autostrip` argument
---------------------------------

By default, when a line is decomposed into a series of strings, the
individual entries are not stripped of leading nor trailing white spaces.
This behavior can be overwritten by setting the optional argument
:keyword:`autostrip` to a value of ``True``::

   >>> data = "1, abc , 2\n 3, xxx, 4"
   >>> # Without autostrip
   >>> np.genfromtxt(StringIO(data), dtype="|S5")
   array([['1', ' abc ', ' 2'],
          ['3', ' xxx', ' 4']],
         dtype='|S5')
   >>> # With autostrip
   >>> np.genfromtxt(StringIO(data), dtype="|S5", autostrip=True)
   array([['1', 'abc', '2'],
          ['3', 'xxx', '4']],
         dtype='|S5')


The :keyword:`comments` argument
--------------------------------

The optional argument :keyword:`comments` is used to define a character
string that marks the beginning of a comment.  By default,
:func:`~numpy.genfromtxt` assumes ``comments='#'``.  The comment marker may
occur anywhere on the line.  Any character present after the comment
marker(s) is simply ignored::

   >>> data = """#
   ... # Skip me !
   ... # Skip me too !
   ... 1, 2
   ... 3, 4
   ... 5, 6 #This is the third line of the data
   ... 7, 8
   ... # And here comes the last line
   ... 9, 0
   ... """
   >>> np.genfromtxt(StringIO(data), comments="#", delimiter=",")
   [[ 1.  2.]
    [ 3.  4.]
    [ 5.  6.]
    [ 7.  8.]
    [ 9.  0.]]

.. note::

   There is one notable exception to this behavior: if the optional argument
   ``names=True``, the first commented line will be examined for names.



Skipping lines and choosing columns
===================================

The :keyword:`skip_header` and :keyword:`skip_footer` arguments
---------------------------------------------------------------

The presence of a header in the file can hinder data processing.  In that
case, we need to use the :keyword:`skip_header` optional argument.  The
values of this argument must be an integer which corresponds to the number
of lines to skip at the beginning of the file, before any other action is
performed.  Similarly, we can skip the last ``n`` lines of the file by
using the :keyword:`skip_footer` attribute and giving it a value of ``n``::

   >>> data = "\n".join(str(i) for i in range(10))
   >>> np.genfromtxt(StringIO(data),)
   array([ 0.,  1.,  2.,  3.,  4.,  5.,  6.,  7.,  8.,  9.])
   >>> np.genfromtxt(StringIO(data),
   ...               skip_header=3, skip_footer=5)
   array([ 3.,  4.])

By default, ``skip_header=0`` and ``skip_footer=0``, meaning that no lines
are skipped.


The :keyword:`usecols` argument
-------------------------------

In some cases, we are not interested in all the columns of the data but
only a few of them.  We can select which columns to import with the
:keyword:`usecols` argument.  This argument accepts a single integer or a
sequence of integers corresponding to the indices of the columns to import.
Remember that by convention, the first column has an index of 0.  Negative
integers behave the same as regular Python negative indexes.

For example, if we want to import only the first and the last columns, we
can use ``usecols=(0, -1)``::

   >>> data = "1 2 3\n4 5 6"
   >>> np.genfromtxt(StringIO(data), usecols=(0, -1))
   array([[ 1.,  3.],
          [ 4.,  6.]])

If the columns have names, we can also select which columns to import by
giving their name to the :keyword:`usecols` argument, either as a sequence
of strings or a comma-separated string::

   >>> data = "1 2 3\n4 5 6"
   >>> np.genfromtxt(StringIO(data),
   ...               names="a, b, c", usecols=("a", "c"))
   array([(1.0, 3.0), (4.0, 6.0)],
         dtype=[('a', '<f8'), ('c', '<f8')])
   >>> np.genfromtxt(StringIO(data),
   ...               names="a, b, c", usecols=("a, c"))
       array([(1.0, 3.0), (4.0, 6.0)],
             dtype=[('a', '<f8'), ('c', '<f8')])




Choosing the data type
======================

The main way to control how the sequences of strings we have read from the
file are converted to other types is to set the :keyword:`dtype` argument.
Acceptable values for this argument are:

* a single type, such as ``dtype=float``.
  The output will be 2D with the given dtype, unless a name has been
  associated with each column with the use of the :keyword:`names` argument
  (see below).  Note that ``dtype=float`` is the default for
  :func:`~numpy.genfromtxt`.
* a sequence of types, such as ``dtype=(int, float, float)``.
* a comma-separated string, such as ``dtype="i4,f8,|S3"``.
* a dictionary with two keys ``'names'`` and ``'formats'``.
* a sequence of tuples ``(name, type)``, such as
  ``dtype=[('A', int), ('B', float)]``.
* an existing :class:`numpy.dtype` object.
* the special value ``None``.
  In that case, the type of the columns will be determined from the data
  itself (see below).

In all the cases but the first one, the output will be a 1D array with a
structured dtype.  This dtype has as many fields as items in the sequence.
The field names are defined with the :keyword:`names` keyword.


When ``dtype=None``, the type of each column is determined iteratively from
its data.  We start by checking whether a string can be converted to a
boolean (that is, if the string matches ``true`` or ``false`` in lower
cases); then whether it can be converted to an integer, then to a float,
then to a complex and eventually to a string.  This behavior may be changed
by modifying the default mapper of the
:class:`~numpy.lib._iotools.StringConverter` class.

The option ``dtype=None`` is provided for convenience.  However, it is
significantly slower than setting the dtype explicitly.



Setting the names
=================

The :keyword:`names` argument
-----------------------------

A natural approach when dealing with tabular data is to allocate a name to
each column.  A first possibility is to use an explicit structured dtype,
as mentioned previously::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, dtype=[(_, int) for _ in "abc"])
   array([(1, 2, 3), (4, 5, 6)],
         dtype=[('a', '<i8'), ('b', '<i8'), ('c', '<i8')])

Another simpler possibility is to use the :keyword:`names` keyword with a
sequence of strings or a comma-separated string::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, names="A, B, C")
   array([(1.0, 2.0, 3.0), (4.0, 5.0, 6.0)],
         dtype=[('A', '<f8'), ('B', '<f8'), ('C', '<f8')])

In the example above, we used the fact that by default, ``dtype=float``.
By giving a sequence of names, we are forcing the output to a structured
dtype.

We may sometimes need to define the column names from the data itself.  In
that case, we must use the :keyword:`names` keyword with a value of
``True``.  The names will then be read from the first line (after the
``skip_header`` ones), even if the line is commented out::

   >>> data = StringIO("So it goes\n#a b c\n1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, skip_header=1, names=True)
   array([(1.0, 2.0, 3.0), (4.0, 5.0, 6.0)],
         dtype=[('a', '<f8'), ('b', '<f8'), ('c', '<f8')])

The default value of :keyword:`names` is ``None``.  If we give any other
value to the keyword, the new names will overwrite the field names we may
have defined with the dtype::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> ndtype=[('a',int), ('b', float), ('c', int)]
   >>> names = ["A", "B", "C"]
   >>> np.genfromtxt(data, names=names, dtype=ndtype)
   array([(1, 2.0, 3), (4, 5.0, 6)],
         dtype=[('A', '<i8'), ('B', '<f8'), ('C', '<i8')])


The :keyword:`defaultfmt` argument
----------------------------------

If ``names=None`` but a structured dtype is expected, names are defined
with the standard NumPy default of ``"f%i"``, yielding names like ``f0``,
``f1`` and so forth::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, dtype=(int, float, int))
   array([(1, 2.0, 3), (4, 5.0, 6)],
         dtype=[('f0', '<i8'), ('f1', '<f8'), ('f2', '<i8')])

In the same way, if we don't give enough names to match the length of the
dtype, the missing names will be defined with this default template::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, dtype=(int, float, int), names="a")
   array([(1, 2.0, 3), (4, 5.0, 6)],
         dtype=[('a', '<i8'), ('f0', '<f8'), ('f1', '<i8')])

We can overwrite this default with the :keyword:`defaultfmt` argument, that
takes any format string::

   >>> data = StringIO("1 2 3\n 4 5 6")
   >>> np.genfromtxt(data, dtype=(int, float, int), defaultfmt="var_%02i")
   array([(1, 2.0, 3), (4, 5.0, 6)],
         dtype=[('var_00', '<i8'), ('var_01', '<f8'), ('var_02', '<i8')])

.. note::

   We need to keep in mind that ``defaultfmt`` is used only if some names
   are expected but not defined.


Validating names
----------------

Numpy arrays with a structured dtype can also be viewed as
:class:`~numpy.recarray`, where a field can be accessed as if it were an
attribute.  For that reason, we may need to make sure that the field name
doesn't contain any space or invalid character, or that it does not
correspond to the name of a standard attribute (like ``size`` or
``shape``), which would confuse the interpreter.  :func:`~numpy.genfromtxt`
accepts three optional arguments that provide a finer control on the names:

   :keyword:`deletechars`
      Gives a string combining all the characters that must be deleted from
      the name. By default, invalid characters are
      ``~!@#$%^&*()-=+~\|]}[{';:
      /?.>,<``.
   :keyword:`excludelist`
      Gives a list of the names to exclude, such as ``return``, ``file``,
      ``print``...  If one of the input name is part of this list, an
      underscore character (``'_'``) will be appended to it.
   :keyword:`case_sensitive`
      Whether the names should be case-sensitive (``case_sensitive=True``),
      converted to upper case (``case_sensitive=False`` or
      ``case_sensitive='upper'``) or to lower case
      (``case_sensitive='lower'``).



Tweaking the conversion
=======================

The :keyword:`converters` argument
----------------------------------

Usually, defining a dtype is sufficient to define how the sequence of
strings must be converted.  However, some additional control may sometimes
be required.  For example, we may want to make sure that a date in a format
``YYYY/MM/DD`` is converted to a :class:`datetime` object, or that a string
like ``xx%`` is properly converted to a float between 0 and 1.  In such
cases, we should define conversion functions with the :keyword:`converters`
arguments.

The value of this argument is typically a dictionary with column indices or
column names as keys and a conversion functions as values.  These
conversion functions can either be actual functions or lambda functions. In
any case, they should accept only a string as input and output only a
single element of the wanted type.

In the following example, the second column is converted from as string
representing a percentage to a float between 0 and 1::

   >>> convertfunc = lambda x: float(x.strip("%"))/100.
   >>> data = "1, 2.3%, 45.\n6, 78.9%, 0"
   >>> names = ("i", "p", "n")
   >>> # General case .....
   >>> np.genfromtxt(StringIO(data), delimiter=",", names=names)
   array([(1.0, nan, 45.0), (6.0, nan, 0.0)],
         dtype=[('i', '<f8'), ('p', '<f8'), ('n', '<f8')])

We need to keep in mind that by default, ``dtype=float``.  A float is
therefore expected for the second column.  However, the strings ``' 2.3%'``
and ``' 78.9%'`` cannot be converted to float and we end up having
``np.nan`` instead.  Let's now use a converter::

   >>> # Converted case ...
   >>> np.genfromtxt(StringIO(data), delimiter=",", names=names,
   ...               converters={1: convertfunc})
   array([(1.0, 0.023, 45.0), (6.0, 0.78900000000000003, 0.0)],
         dtype=[('i', '<f8'), ('p', '<f8'), ('n', '<f8')])

The same results can be obtained by using the name of the second column
(``"p"``) as key instead of its index (1)::

   >>> # Using a name for the converter ...
   >>> np.genfromtxt(StringIO(data), delimiter=",", names=names,
   ...               converters={"p": convertfunc})
   array([(1.0, 0.023, 45.0), (6.0, 0.78900000000000003, 0.0)],
         dtype=[('i', '<f8'), ('p', '<f8'), ('n', '<f8')])


Converters can also be used to provide a default for missing entries.  In
the following example, the converter ``convert`` transforms a stripped
string into the corresponding float or into -999 if the string is empty.
We need to explicitly strip the string from white spaces as it is not done
by default::

   >>> data = "1, , 3\n 4, 5, 6"
   >>> convert = lambda x: float(x.strip() or -999)
   >>> np.genfromtxt(StringIO(data), delimiter=",",
   ...               converter={1: convert})
   array([[   1., -999.,    3.],
          [   4.,    5.,    6.]])




Using missing and filling values
--------------------------------

Some entries may be missing in the dataset we are trying to import.  In a
previous example, we used a converter to transform an empty string into a
float.  However, user-defined converters may rapidly become cumbersome to
manage.

The :func:`~nummpy.genfromtxt` function provides two other complementary
mechanisms: the :keyword:`missing_values` argument is used to recognize
missing data and a second argument, :keyword:`filling_values`, is used to
process these missing data.

:keyword:`missing_values`
-------------------------

By default, any empty string is marked as missing.  We can also consider
more complex strings, such as ``"N/A"`` or ``"???"`` to represent missing
or invalid data.  The :keyword:`missing_values` argument accepts three kind
of values:

   a string or a comma-separated string
      This string will be used as the marker for missing data for all the
      columns
   a sequence of strings
      In that case, each item is associated to a column, in order.
   a dictionary
      Values of the dictionary are strings or sequence of strings.  The
      corresponding keys can be column indices (integers) or column names
      (strings). In addition, the special key ``None`` can be used to
      define a default applicable to all columns.


:keyword:`filling_values`
-------------------------

We know how to recognize missing data, but we still need to provide a value
for these missing entries.  By default, this value is determined from the
expected dtype according to this table:

=============  ==============
Expected type  Default
=============  ==============
``bool``       ``False``
``int``        ``-1``
``float``      ``np.nan``
``complex``    ``np.nan+0j``
``string``     ``'???'``
=============  ==============

We can get a finer control on the conversion of missing values with the
:keyword:`filling_values` optional argument.  Like
:keyword:`missing_values`, this argument accepts different kind of values:

   a single value
      This will be the default for all columns
   a sequence of values
      Each entry will be the default for the corresponding column
   a dictionary
      Each key can be a column index or a column name, and the
      corresponding value should be a single object.  We can use the
      special key ``None`` to define a default for all columns.

In the following example, we suppose that the missing values are flagged
with ``"N/A"`` in the first column and by ``"???"`` in the third column.
We wish to transform these missing values to 0 if they occur in the first
and second column, and to -999 if they occur in the last column::

    >>> data = "N/A, 2, 3\n4, ,???"
    >>> kwargs = dict(delimiter=",",
    ...               dtype=int,
    ...               names="a,b,c",
    ...               missing_values={0:"N/A", 'b':" ", 2:"???"},
    ...               filling_values={0:0, 'b':0, 2:-999})
    >>> np.genfromtxt(StringIO.StringIO(data), **kwargs)
    array([(0, 2, 3), (4, 0, -999)],
          dtype=[('a', '<i8'), ('b', '<i8'), ('c', '<i8')])


:keyword:`usemask`
------------------

We may also want to keep track of the occurrence of missing data by
constructing a boolean mask, with ``True`` entries where data was missing
and ``False`` otherwise.  To do that, we just have to set the optional
argument :keyword:`usemask` to ``True`` (the default is ``False``).  The
output array will then be a :class:`~numpy.ma.MaskedArray`.


.. unpack=None, loose=True, invalid_raise=True)


Shortcut functions
==================

In addition to :func:`~numpy.genfromtxt`, the :mod:`numpy.lib.io` module
provides several convenience functions derived from
:func:`~numpy.genfromtxt`.  These functions work the same way as the
original, but they have different default values.

:func:`~numpy.ndfromtxt`
   Always set ``usemask=False``.
   The output is always a standard :class:`numpy.ndarray`.
:func:`~numpy.mafromtxt`
   Always set ``usemask=True``.
   The output is always a :class:`~numpy.ma.MaskedArray`
:func:`~numpy.recfromtxt`
   Returns a standard :class:`numpy.recarray` (if ``usemask=False``) or a
   :class:`~numpy.ma.MaskedRecords` array (if ``usemaske=True``).  The
   default dtype is ``dtype=None``, meaning that the types of each column
   will be automatically determined.
:func:`~numpy.recfromcsv`
   Like :func:`~numpy.recfromtxt`, but with a default ``delimiter=","``.